Macos – How to set the default shell on a Mac, e.g. to Fish

This somewhat depends on what platform you are on. The most common way to do this is by printing ANSI escape sequences. For a simple example, here's some Python code from the Blender build scripts:

class bcolors:
    HEADER = '\033[95m'
    OKBLUE = '\033[94m'
    OKCYAN = '\033[96m'
    OKGREEN = '\033[92m'
    WARNING = '\033[93m'
    FAIL = '\033[91m'
    ENDC = '\033[0m'
    BOLD = '\033[1m'
    UNDERLINE = '\033[4m'

To use code like this, you can do something like:

print(bcolors.WARNING + "Warning: No active frommets remain. Continue?" + bcolors.ENDC)

Or, with Python 3.6+:

print(f"{bcolors.WARNING}Warning: No active frommets remain. Continue?{bcolors.ENDC}")

This will work on unixes including OS X, Linux and Windows (provided you use ANSICON, or in Windows 10 provided you enable VT100 emulation). There are ANSI codes for setting the color, moving the cursor, and more.

If you are going to get complicated with this (and it sounds like you are if you are writing a game), you should look into the "curses" module, which handles a lot of the complicated parts of this for you. The Python Curses HowTO is a good introduction.

If you are not using extended ASCII (i.e., not on a PC), you are stuck with the ASCII characters below 127, and '#' or '@' is probably your best bet for a block. If you can ensure your terminal is using a IBM extended ASCII character set, you have many more options. Characters 176, 177, 178 and 219 are the "block characters".

Some modern text-based programs, such as "Dwarf Fortress", emulate text mode in a graphical mode, and use images of the classic PC font. You can find some of these bitmaps that you can use on the Dwarf Fortress Wiki see (user-made tilesets).

The Text Mode Demo Contest has more resources for doing graphics in text mode.

On macOS Big Sur and later, use this command:

sudo lsof -i -P | grep LISTEN

or to just see just IPv4:

sudo lsof -nP -i4TCP:$PORT | grep LISTEN

On older versions, use one of the following forms:

sudo lsof -nP -iTCP:$PORT | grep LISTEN
sudo lsof -nP -i:$PORT | grep LISTEN

Substitute $PORT with the port number or a comma-separated list of port numbers.

Prepend sudo (followed by a space) if you need information on ports below #1024.

The -n flag is for displaying IP addresses instead of host names. This makes the command execute much faster, because DNS lookups to get the host names can be slow (several seconds or a minute for many hosts).

The -P flag is for displaying raw port numbers instead of resolved names like http, ftp or more esoteric service names like dpserve, socalia.

See the comments for more options.

For completeness, because frequently used together:

To kill the PID:

sudo kill -9 <PID>
# kill -9 60401